Avaya Vantage - Page 95

Specific audio settings
Parameter Type Default
value
Is set to
default
on reset
Description
AGCHAND Numeric 0 No Specifies Automatic Gain Control (AGC) for the
handset. The options are:
• 0: AGC is disabled.
• 1: AGC is enabled.
This parameter is supported in all modes.
For provisioning, use:
• The SET command in the 46xxsettings.txt
file.
• The Settings > Audio settings > Auto gain
control (AGC) > Handset Auto Gain Control
menu on the device.
This parameter can be stored on the PPM or
backup server.
AGCHEAD Numeric 0 No Specifies Automatic Gain Control (AGC) for the
headset. The options are:
• 0: AGC is disabled.
• 1: AGC is enabled.
This parameter is supported in all modes.
For provisioning, use:
• The SET command in the 46xxsettings.txt
file.
• The Settings > Audio settings > Auto gain
control (AGC) > Headset Auto Gain Control
menu on the device.
This parameter can be stored on the PPM or
backup server.
AGCSPKR Numeric 0 No Specifies Automatic Gain Control (AGC) for the
speaker. The options are:
• 0: AGC is disabled.
• 1: AGC is enabled.
This parameter is supported in all modes.
For provisioning, use:
• The SET command in the 46xxsettings.txt
file.
Table continues…
Phone UI related settings
May 2018 Installing and Administering Avaya Vantage
™
95
Comments on this document? infodev@avaya.com