Avaya Vantage - Page 94

Parameter Type Default
value
Is set to
default
on reset
Description
• 2: Large font size.
• 1: Normal font size.
• 0: Small font size.
This parameter is supported in all modes.
For provisioning, use the Settings > Display >
Font size menu on the device.
This parameter can be stored on the PPM or
backup server.
INITIAL_SCREEN String ADMIN Yes Specifies the initial screen presented to a user after
logging in to Avaya Vantage
™
.
Assign one of the following values:
• PHONE
• HOMESCREEN
• ADMIN
For provisioning, use the Settings > Display >
Screen presented after login menu on the device.
This parameter is not supported in the non Avaya
Breeze
™
CSDK application based mode.
This parameter can be stored on the PPM or
backup server.
ADMIN_INITIAL_S
CREEN
String HOME Yes This parameter specifies whether the Home screen
or Telephony screen is presented as the initial
screen after the user logs in to Avaya Vantage
™
.
Assign one of the following values:
• PHONE
• HOMESCREEN
This parameter is not supported in the non Avaya
Breeze
™
CSDK application based mode.
For provisioning, use the SET command in the
46xxsettings.txt file.
Supported configuration parameters
May 2018 Installing and Administering Avaya Vantage
™
94
Comments on this document? infodev@avaya.com