User’s Manual—SNAP™ 700 Printer 17
Classification: Avery Dennison - Public
CAUTION: Lifting the printer from any component other
than case or stacker supports can damage the printer and
cause needless start up delays.
Figure 2B: Lift Locations
3.3.2 Inspection / Inventory Checklist
1. Inspect the printer for any damage that may have occurred from shipping.
2. Check the SNAP 700 printer shipping carton to be sure the following
items are also included with your printer.
Serial Cable
A quick-disconnect power cord for 115-Volt printer)
Unwind Assembly
3. If you see obvious damage to the printer, or if any items listed above are
missing, contact AVERY DENNISON for further instructions.
In the U.S.A., call (937) 865-2123, select option for Customer
Service.
Outside the U.S.A., please contact your local AVERY DENNISON
supplier.
CAUTION: Each customer must take responsibility to ensure the
workstation created for the SNAP 500 printer meets the
recommended requirements to ensure optimal operation of the
printer.
To Next Page
Loading...
