Avery Dennison SNAP 700 - Printer Technical Specifications

User’s Manual—SNAP™ 700 Printer 101
Classification: Avery Dennison - Public
11.3 Printer Specifications
Print Method:
5” web thermal transfer two sided printer
Speeds:
3 IPS (76.2mm/second), 4.5 IPS (114.3mm/second), 5 IPS (127mm/second),
6 IPS (152.4mm/second), 7 IPS (177.8mm/second), 8 IPS (202.3mm/second),
10 IPS (254mm/second), 12 IPS (304.8mm/second)
Label Size
Standard Feed:
Min: 1/2" (12.7mm) web x 1.10" (28mm) feed at 3 IPS (standard stacker)
Min: 1/2" (12.7mm) web x 1.10" (28mm) feed at 4.5 IPS (standard stacker)
Min: 1/2" (12.7mm) web x 1.10" (28mm) feed at 5 IPS (standard stacker)
Min: 1/2" (12.7mm) web x 1.10" (28mm) feed at 6 IPS (standard stacker)
Min: 1/2" (12.7mm) web x 1.10" (28mm) feed at 7 IPS (standard stacker)
Min: 1/2" (12.7mm) web x 1.185" (28mm) feed at 8 IPS (standard stacker)
Min: 1/2" (12.7mm) web x 1.413" (32.1mm) feed at 10 IPS (standard stacker)
Min: 1/2" (12.7mm) web x 1.667" (37.4mm) feed at 12 IPS (standard stacker)
Short Feed Option:
Min: 1/2" (12.7mm) web x 0.750" (19mm) feed at 3 IPS (standard stacker)
Min: 1/2" (12.7mm) web x 0.787" (20.1mm) feed at 4.5 IPS (standard stacker)
Min: 1/2" (12.7mm) web x 0.853" (25.1mm) feed at 5 IPS (standard stacker)
Min: 1/2" (12.7mm) web x 0.960" (25.1mm) feed at 6 IPS (standard stacker)
Min: 1/2" (12.7mm) web x 1.079" (26.9mm) feed at 7 IPS (standard stacker)
Min: 1/2" (12.7mm) web x 1.185" (26.9mm) feed at 8 IPS (standard stacker)
Min: 1/2" (12.7mm) web x 1.413" (32.1mm) feed at 10 IPS (standard stacker)
Min: 1/2" (12.7mm) web x 1.667" (37.4mm) feed at 12 IPS (standard stacker)
Max: 5 1/8" (130.2mm) web x 5" (127mm) feed (standard stacker)
5:1 web feed to width ratio
5 1/8" (130.2mm) web x 14" (355.6mm) feed
No stacker – optional rewind unit or cut without stacking
Stacker capacity – coated tape approximately 2,000 labels for full stacker
Print Area
Min: None
Max: Up to 5" (127 mm) web x Up to 13.875" (352.4 mm) feed -
Resolution
305 DPI (11.8 dots per mm)
Fonts
True Type – English alphabet, Cyrillic, and Asian characters.
4pt up to 96pt (300 DPI), Supply dependant on 4, 5 and 6 point characters
All rotations 0°, 90°, 180°, 270°
Logos
No restriction on number or size per tag (up to maximum image area)
All rotations 0°, 90°, 180°, 270°
Care Symbols
Full Ginetex Care Symbol set and full NAFTA / ASTM Care Symbol Set
Fully Scaleable
All rotations 0°, 90°, 180°, 270°
Justification
Left, Right, and Center field selectable
Stock
Support for blank or pre-printed fabrics, coated or uncoated polyester, woven labels, dip-coated
nylons, heat transfer and heat seal tapes. Also support for blank or pre-printed card stock,
coated or uncoated, up to 10 point - as well as pressure sensitive labels.
Supply Roll: 3” ID (76 mm) cardboard core, Maximum roll size 11.5” O.D. (29 cm)