Avery Dennison SNAP 700 - Stock and Ink Advance Problems

User’s Manual—SNAP™ 700 Printer 85
Classification: Avery Dennison - Public
9.2 Stock / Ink Advance
Problem
Probable Cause
Corrective Action
Stock or ink does not
advance when the
start button is
depressed.
1) No batches to be printed.
(Data light is not on.)
1) Download batch (If batch downloaded uses
the same design as a previously
downloaded batch, the machine will start
automatically).
2) An interlock condition exists.
(Supply or Error light is on.)
1) Press the voice button to determine the
error.
2) If using PCMate Platinum, check the virtual
control / display.
3) Stock is bound.
1) Remove and rethread the stock.
4) Ink is bound.
1) Remove and rethread the ink.
IF THE RECOMMENDED CORRECTIVE ACTIONS DO NOT
RESOLVE THE PROBLEM (S), CONTACT YOUR LOCAL
AVERY DENNISON REPRESENTATIVE.
