User’s Manual—SNAP™ 700 Printer
Classification: Avery Dennison - Public
Table of Contents
1.0 INTRODUCTION 9
2.0 SAFETY INSTRUCTIONS 11
3.0 INSTALLATION 13
3.1 Preparing for the installation 13
3.1.1 AC Power Line 13
3.1.2 Location Considerations 13
3.1.3 PC Requirements 14
3.1.4 User Safety 15
3.2 Receiving 15
3.3 Unpacking 16
3.3.1 Removing the printer from the carton 16
3.3.2 Inspection / Inventory Checklist 17
3.3.3 Downloading Support Documentation 18
3.3.4 Disassembly and Disposal 18
3.4 Printer Description 19
3.4.1 Component Descriptions 19
3.4.2 Printer Configurations 20
3.5 Printer Setup 21
3.5.1 Attaching the Stacker 21
3.5.2 Attaching the Unwind Assembly 22
3.5.3 Checking the Main Fuse Configuration 22
3.5.4 Installing the Power Cord 23
3.6 Communications Cable Installation 24
3.6.1 Serial Cable 24
3.6.2 USB Cable 24
3.7 Networking Setup 25
3.7.1 BIOS settings 25
3.7.2 Connecting the networking cable 25
3.7.3 Setting the Printer IP Address 26
3.8 PCMate Platinum Software Installation 27
3.9 Printing a Test Label 27
3.9.1 Loading Supplies 27
3.9.2 Turning the Printer on 27
3.9.3 Selecting the Test Format 28
3.9.4 Printing the Test Labels 28
To Next Page
Loading...
