Avery Dennison SNAP 700 - Page 5

User’s Manual—SNAP™ 700 Printer
Classification: Avery Dennison - Public
4.0 OPERATION 29
4.1 Loading Supplies 29
4.1.1 Installing Ink to the Top Ink Supply Station 29
4.1.2 Installing Ink to the Bottom Ink Supply Station 32
4.1.3 Loading the Stock 32
4.1.4 Butt Splice 34
4.1.5 3.1.5 Threading Diagrams 35
4.2 Sending a Print Job to the Printer 36
4.3 Printing Labels 36
4.3.1 The Control Panel 36
4.3.2 Printing 37
4.3.3 Handling the Leader 37
4.3.4 Feeding the stock 37
4.3.5 Errors 38
4.3.6 End of Day 38
4.3.7 Clearing Print Jobs 38
4.4 Using Pre-Printed Stock 39
4.4.1 Selecting the Sensor 39
4.4.2 Aligning the Stock to the Sensor 39
4.4.3 Aligning the Sensor to the Stock 40
4.5 Option Menu System 40
4.5.1 Running Test Patterns 41
4.5.2 Setting / Adjusting Voice Button Volume 43
5.0 MAKING ADJUSTMENTS 45
5.1 Print Head Adjustments 45
5.1.1 Adjusting Print Head Pressure 45
5.1.2 Adjusting Density (Darkness) 46
5.2 Adjusting the Stacker 46
5.2.1 Stacker Position 46
5.2.2 Toggle Switch 46
5.2.3 Stacker Angle 47
5.2.4 Platform 47
5.2.5 Static brush 48
5.3 Virtual Control Panel 49
5.3.1 Introduction 49
5.3.2 Changing Printer Settings in PCMate 50
5.3.3 Print/Cut Adjust Tab 51
5.3.4 Selecting the Printer Language 52
5.3.5 Setting the Date and Time 52
5.3.6 Enabling or Disabling the Cutter 53
5.3.7 Selecting the Print Speed 53
5.3.8 Selecting the Flagging Mode 53
5.3.9 Selecting the Sense Mark Type 54
5.3.10 Setting the Default Transfer 54