User’s Manual—SNAP™ 700 Printer
Classification: Avery Dennison - Public
5.3.11 Viewing the Life Counts 55
5.3.12 Firmware 55
5.3.13 Print Quality 56
5.3.14 Other information on VCP 56
5.4 Web Server 57
5.4.1 Viewing and Changing the Printer Settings 57
5.4.2 Converting the DHCP Address to a Static Address 58
5.4.3 Resetting the Printer to DHCP Mode 59
5.4.4 Troubleshooting the Network Connection 59
6.0 MAINTENANCE 60
6.1 Print Head Cleaning and Handling 60
6.1.1 Handling Techniques 60
6.1.2 Cleaning Procedures 61
6.2 Print Head Replacement 62
6.3 Lubrication 65
6.4 Rotary Knife Assembly 65
6.4.1 Removing and Replacing the Knife Assembly 66
6.4.2 Adjust the Knife Home Position 69
6.5 Rubber Roller Replacement 69
7.0 SERVICE ADJUSTMENTS 70
7.1 Stock (Web) Guide Position 70
7.2 Stock (Web) Guide Width Adjustments 70
7.3 Stock Feed 70
7.4 Knife Shear Adjustment 71
8.0 UPGRADING THE PRINTER FIRMWARE 73
8.1 Introduction 73
8.2 Selecting the UPG file 73
8.3 Getting the UPG file 73
8.3.1 Getting UPG file using D2Comm 73
8.3.2 Getting UPG file without using D2Comm 74
8.4 Performing the Upgrade 74
8.4.1 Unzipping the file 74
8.4.2 Upgrading through PCMate 75
8.4.3 Upgrading through USB Flash Drive 78
8.4.4 Upgrading through the Webserver 79
9.0 ELECTRICAL TROUBLESHOOTING 82
9.1 Power Up / Sign On / Communications 82
To Next Page
Loading...
