74 User’s Manual—SNAP™ 700 Printer
Classification: Avery Dennison - Public
account.
Log in to D2Comm, select “In Plant”, and then “Retrieve Updates”.
The upgrade file will automatically download.
Start PCMate to upgrade. There is no need to unzip this file as it will
already be a UPG file.
8.3.2 Getting UPG file without using D2Comm
You may download the upgrade file as follows:
1. Go to http://pfs.averydennison.com/en/home.html
2. Under “Products and Services” click “Utilities and Firmware”
3. Next under “Apparel Model Search” (2
nd
one down), click “SNAP 700”
4. Choose one of 3 upgrade files. For example, for version 3.36:
a. V336_15_10.zip – This is the complete upgrade and includes English
and all alternate language messages and prompts
b. V336_15_10OS.zip – This is the upgrade with English only
c. V336_ALT_LANGUAGES.zip – This upgrade contains only the alternate
language messages and prompts. This version does NOT contain the
printer operating system.
The file that downloads has “zip” extension. You must
unzip and extract the UPG file from this download.
8.4 Performing the Upgrade
8.4.1 Unzipping the file
1. Once you have received the upgrade file through D2Comm or the
website, make sure it has the “.upg” extension or is an UPG file “Type”. If
it has the “.zip” extension, then unzip/extract the file to the desired
folder.
This is the .upg file that the printer
uses. It is inside the .zip file.
Extract/unzip this file to get the .upg file
To Next Page
Loading...
