Avery Dennison SNAP 700 - Page 83

User’s Manual—SNAP™ 700 Printer 83
Classification: Avery Dennison - Public
board” or “Reset the
BIOS”. During the power
up of the printer.
2) Motherboard failure
1) Replace motherboard
Printer says “Boot Error 3”
or “Hardware error
three” during power up.
Printer requires service.
Corrupted safe
operating system.
Replace the flash disk”.
(Message depends on
software version.)
1) Flash Disk Failure
1) Replace Flash Disk Module
2) Motherboard Failure
1) Replace motherboard