Axion 40 Series - 5. TROUBLESHOOTING; 5.1. FAULT FINDING; 5.1.1. POWER SUPPLY PROBLEMS

© AXION TECHNOLOGIES LTD. OPERATION
Menu
No.
Use Action
8. Automatic ENTER Allows to cancel the requirement to press the ENTER key to
complete the route number.
Step 1 Displays the current requirement to press ENTER for a few
seconds.
Step 2 Allows to cancel the requirement to press ENTER.
1. Activate ENTER required to complete the route number capture.
2. Deactivate ENTER not required to complete the route number when typing a
letter or after entering the fourth digit.
9. Protocol Used Allow to change RS-232 protocol of the B port.
Step 1 Displays the current protocol of B port for a few seconds.
Step 2 Allows to modify the protocol of B port.
1. Cubic CUBIC protocol.
2. Consat CONSAT protocol.
15
Activate Intensity Level
Test
Checks photosensor functionality. Displays current intensity level
digit of each sign.
User Manual (Revision A) Document No.: 3042145 Page 38