Need help?Do you have a question about the Baer DLX and is the answer not in the manual?
General| Brand | Baer |
|---|---|
| Model | DLX |
| Category | Data Loggers |
| Language | English |
Covers the procedure for configuring DLX parameters via software or keypad.
Details the process of calculating and storing maximum demand values.
Details how to set and maintain the DLX unit's internal clock.
Defines the time intervals used for demand and energy increment calculations.
Covers the device's internal memory for parameters, load profiles, and events.
Explains how to reset the unit to its factory default configuration.
Outlines the necessary steps before starting the DLX unit's commissioning.
Details the procedure and supported passwords for accessing protected functions.
Details how to reset all parameters to factory defaults and restart the unit.
Explains how to erase all data from the DLX unit's internal memory.
Describes how to set the internal real-time clock and date.
Explains the process and necessity of activating a PC-Card.
Details how to safely deactivate a PC-Card before removal.
Details the RS232 service interface for programming and data retrieval.
Explains the process of activating a PC-Card for data storage.
Lists specifications for pulse and control input types.
Lists supported Modbus register addresses for status and meter values.
To Next Page