Baer DLX - 7.7.3.1 Increment Counter; 7.7.3.2 Cumulative Counter; 7.7.3.3 Maximum Demand

66
When displaying billing data, the values are shown depending on the rate,
which can be selected. Each entry can only be selected by the secondary
reset index (0..99), the primary reset index (1..12, settable) will be dis-
played automatically.
7.7.3.1 Increment counter
How to select „increment counter”
Press the -key when in menu item „Info: Billing data“. The submenu
item will be activated.
Changing the Parameters
The or keys can be used to select values for the internal reset
counter, the energy rate, the input or the total register. The date shown (the
date and time of the reset) will be adjusted automatically.
What will be shown ?
The display will show the increment (consumption) energy values for all in-
puts and totals as of the date and time of the maximum demand reset. You
can use the or the key to select the desired reset index.
7.7.3.2 Cumulative counter
How to get there
Press the key once when in menu item „Info: Billing data“ and then the
key. The submenu item will be activated.
Changing the parameters
The or keys can be used to select values for the internal reset
counter, the energy rate, the inputs or the total register. The date shown
(the date and time of the reset) will be adjusted automatically.
What will be shown ?
The display will show the cumulative energy values (also called meter read-
ings) for all inputs and totals as of the date and time of the maximum de-
mand reset. You can use the or the key to select the desired reset
index.
7.7.3.3 Maximum demand
How to get there
Press the key twice when in menu item „Info: Billing data“ and then the
key. The submenu item will be activated.
Changing the parameters
The or keys can be used to select values for the internal reset
counter, the demand rate, the inputs or the total register. The date shown
(the date and time of the maximum) will be adjusted automatically.
What will be shown ?
The display will show the maximum demand values for all inputs and totals
as of the date and time of the maximum demand reset. You can use the
or the key to select the desired reset index.