73
7.9.1 Set time
How to get there
Press the -key when in menu item “Maintenance”. The function „Set
time“ is password protected.
Password protection
The function „Set time“ can be activated with either the password for
PARAMETERS or the password for SET. After entering the correct pass-
word (see „Password input“ on page 56) the function will be executed.
What can be done ?
You can set the date and time of the internal real time clock of the DLX unit.
Setting the time
You can set the day (DD), the month (MMM), the year (YYYY), the hour
(hh) and the minute (mm), one after the other. Use the and keys to
change the selected value (increase or decrease). Use the key to
confirm your input and to move to the next value.
Press key after setting the minute value to set the time into the DLC
unit. The value for the seconds will be set to zero.
Press the key to exit the function and to return to the menu item
„Maintenance“ without altering the date and time of the unit.
7.9.2 Activate PC-Card
How to get there
Press the -key once when in menu item “Maintenance” and then press
the key. The function “Activate PC-Card“ is password protected.
Password protection
The function “Activate PC-Card“ can be activated with either the password
for PARAMETERS or the password for PC-CARD. After entering the cor-
rect password (see „Password input“ on page 56) the function will be exe-
cuted.
Why do you have to activate a PC-Card ?
If you do not activate the PC-Card, the DLX unit cannot write to the PC-
Card. By activating the PC-Card the virtual interface between the DLX unit
and the PC-Card will be activated and the PC-Card will be prepared for
data storage.
To Next Page
Loading...