Baer DLX - 12.1 Factory settings

95
12.1 Factory settings
List of the most important factory settings (basic settings and software settings)
on delivery or after a unit restart:
Date: Saturday, 1. January 2011
Time: 00:00:00
Device identifier: 0000000000000000
Number of input channels: max. 16 (according to order, all activated)
Number of totalling units (sums): 0
Differential totals: Off
Apparent demand reg./cos( ϕ ): 0
Operation mode: 2 energy rates, 2 demand rates
Pulse ratios: 1:1 for all counters (energy and demand)
Counter values: 0
Totalling units (sums): Inactive
Usage of control inputs: Ctl1: SYN
Clt2: RSTX
Clt3: ANZ
Clt4: TR1
Clt5: TR2
Clt6: TR3
Clt7: TR4
Usage of control outputs: Out1: unused
Out2: unused
Out3: unused
Out4: unused
Usage of relays: Rel1: Alarm 2 (device fault)
Rel2: MPA1 (Tm1)
Number of resets: 0
Registration periods: Registration period 1 Tm1/MP1: 15 minutes
Registration period 2 Tm2/MP2: inactive
Start of measurement: Immediately after switching on
Baud rates for data retrieval: 9600 Baud (data interface “Com1”)
9600 Baud (modem interface “Com2”)
9600 Baud / fix (service interface)