Baer DLX - Connector X4 (Pulse Inputs 7-16); Figure 21, Connector X4

48
5.4.5 Connector X4 (Pulse inputs 7-16)
Terminal type Combicon MSTB2,5/10-ST-5,08 (Phoenix),
2 per input card
Function: Inputs (In7 to In16, terminal 1 to 20)
Input types: 10 input modules (IEW, IES, IED, signal current)
Terminal Description
1 Pulse input In7– IN7
2 Pulse input In7+
3 Pulse input In8– IN8
4 Pulse input In8+
5 Pulse input In9– IN9
6 Pulse input In9+
7 Pulse input In10– IN10
8 Pulse input In10+
9 Pulse input In11– IN11
10 Pulse input In11+
11 Pulse input In12– IN12
12 Pulse input In12+
13 Pulse input In13– IN13
14 Pulse input In13+
15 Pulse input In14– IN14
16 Pulse input In14+
17 Pulse input In15– IN15
18 Pulse input In15+
19 Pulse input In16– IN16
20 Pulse input In16+
Figure 21, Connector X4


 When IED (bi-current / bi-polar) modules are used, then the signal
conditioning must be adjusted by means of the programming soft-
ware "DLXPARA".
When using mixed types of pulse inputs, the IES type modules are lo-
cated at the left hand side.