Barber-Colman MACO Series - Figure 6.10 Wiring the High Spd Ana (Parison) Board DC Inputs; Figure 6.11 Wiring the High Spd Ana (Parison) Board DC Outputs

1640-IN-031-C-08
Page 52 of 104
Eurotherm/Barber-Colman
MACO Series Controller Installation
Figure 6.10 Wiring the High Speed Analog Signal Processor (Parison) Board DC Inputs
Bond to
Chassis
DC In 1
DC In 2
DC In 3
DC In 4
DC Common
DC Common
24 Vdc
Supply
+
-
(Overbraid)
Note that DC Inputs and Outputs
have a shared common.
Bond to
Chassis
+DC for Outs
DC I/O Common
DC Out 1
DC Out 2
DC Out 3
DC Out 4
DC Common
24 Vdc
Supply
+
-
Power Supply outputs MUST have
ferrite beads capable of filtering
30 MHZ to 100 MHZ
(Overbraid)
Note that DC Inputs and Outputs
have a shared common.
Figure 6.11 Wiring the High Speed Analog Signal Processor (Parison) Board DC Outputs