Basler BE1-11g - Retrieving Lockout Status from the BE1-11 G

170 9424200994 Rev N
Table 66. Operational Settings
Setting
Range
Increment
Unit of Measure
Default
Mode
Disabled or Enabled
n/a
n/a
Disabled
Retrieving Lockout Status from the BE1-11g
Lockout status can be viewed through BESTCOMSPlus, the front-panel display, and the web page
interface.
To view 86 lockout status using BESTCOMSPlus, use the Metering Explorer to open the Status, 86
Lockout Status screen shown in Figure 112. To view lockout status from the front-panel display, navigate
to Metering Explorer, Status, 86 Lockout Status.
Figure 112. 86 Lockout Status Screen
Lockout Functions (86) BE1-11g