Disposal instrutions 12.3T
12.3 Disp osal instrutions
Preconditions
• The device has already properly been demounted.
• All technical appliances for demounting are prepared and are technically in good order and condition.
12.3.1 Modules
A
A
B
Figure 12.1: Disassembly illustration
The components/modules given in round brackets you will find in the figure mentioned above.
Sheet steel (A) Sheet steel must be given to the iron metal recycling.
Aluminium (B) Aluminium must be given to the non-iron metal recycling.
Capacitors (D) Capacitors must be recycled as hazardous waste. Thereby refer to the
relevant instructions.
Semiconductor modules
(E)
Semiconductor modules must be recycled as hazardous waste. Thereby
refer to the relevant instructions.
Electronic scrap (F) The electronic scrap from P CBs, which no further can be demounted, must
be recycled as hazardous waste. Thereby refer to the relevant instructions.
Instrution Manual
b maXX
®
BM3400
151
Doument No.: 5.07013.03 from 206