To Next Page

To Previous Page

Legal instrutions 2.5T

2.4 Legal instrutions

This manual is intended for technically qualiﬁed personnel that has been specially trained and is completely

familiar with all maintenance and repair measures. The devices are made according to the state-of-the-ar t

technology and are fail-safe. They can be installed safe, c an be put into operation and they function without

problems, if it is assured, that the instructions of the manual are obeyed. The user bears responsibility for

the service and commissioning in accordance to the safety instructions of the valid standards and other im-

portant national or local regulations, which concern the conductor dimensioning and protection, grounding,

circuit breakers, overcurrent protection and so on. For damages, which result from the mounting or from the

connection, the one is liable, who has carried out the mounting or the installation.

NOTE

The b maXX® BM3400 devices are designed to solve the requirements to get the CE sign, if they

are mounted in an enclosure system that meets the requirements with respect to protection

against accidental contact, degree of protection and environmental conditions.

If the d evice is operated disregarding the above mentioned requirements, it has to be assumed,

that there will no longer persist a CE conformity.

2.5 Appropriate use

Always use the device according to the terms. The notes stated below shall give you a feeling for the speciﬁed

application of the device. We do not raise any c laim to the sufﬁciency of the notes stated below - obey all

instructions given in this manual.

• Conﬁgure the application in such a way, that you always operate the device within its speciﬁcations.

• Use this device only as converter for triple phase drives.

• Make sure, that only qualiﬁed personnel work with/at this device.

• Mount this device only at an adequate c arrying wall.

• Install this device in the way as it is described in the manual.

• Make sure, that the mains alwa ys applies to the g iven speciﬁcations.

• Only operate the device, if it is technically free of defects.

• Operate this device only in combination with released components of Baumüller Kamenz GmbH.

• Operate the device always in an environment, as it is spreciﬁed in «Appendix D - Technical data» from

page 172.

• Always operate the device as produced in series. Due to safety reasons you may not alter or modify the

device.

• Consider all instr uctions referring to this, if you are intending to store the device.

Instrution Manual

b maXX

BM3400

Doument No.: 5.07013.03 from 206

Baumuller b maXX BM3400 Series User Manual

Questions and Answers: