Baumuller b maXX BM3400 Series User Manual

T C App endix C - Delaration of Conformity, Delaration by Manufaturer, UL-ertiation
Council Decision 93/465/EWG, annex I B. a) + c ) The CE-marking is applied to the device and to the manual,
as soon as we have determined, that the requirements of the relevant directives are complied with.
All converters and controls of Baumüller Kamenz GmbH comply with die requirements from 73/23/EWG
(Low-Voltage Directive). By all converters and controls of Baumüller Kamenz GmbH complying with the
requirements of harmonized standards EN 50178, EN 60204-1, EN 60529 and HD 625.1 S1, the protective
targets of 73/23/EWG are reached. Provide this Baumüller device is subjected to normal use in your machin-
ery you can assume that the device satisfies the requirements of 98/79/EG (Machine directive). Therefore
the device was developed and constructed in such a way that the requirements of the harmonized standard
EN 60204-1 can be complied with by the electrical installation. Decisive for the compliance of 89/336/EWG
(EMC-directive) is the installation of the device. As you execute this installation on your own, you also are
responsible for the adherence to 89/336/EWG. A Declaration of Conformity according the EMC-directive we
therefore cannot issue. We will support you in the form of EMC instructions. You will find this information
in the manuals of the b maXX® BM3400 basic unit. If all requirements have been fulfilled, which we placed
in this manual, it can be assumed,(Directive: assume), that the drive complies with the requirements of the
EMC directive. The limit values and requirements for variable-speed electric drives are specified in the har-
monized product standard EN 61800-3. In case you are erecting an installation, for which a Declaration of
Conformity on the EMC directive must be g enerated, it may be necessary, to specify several har monized stan-
dards, which you have used for the compliance of the protection targets of the directive. For electric drives
the harmonized product standard EN 61800-3 must be used. In order to distribute your machine within the
EU, the following must exist:
• Sign of Conformity (CE-sign)
• Declaration(s) of Conformity according to the relevant directive(s) which are important for the ma-
chine.
C.3 Denition of the term Delaration of Conformity
A Declaration of Conformity as defined in this manual is a declaration that the electrical equipment brought
into circulation conforms to all the relevant fundamental safety- and health requirements. With this Dec-
laration of Conformity in this chapter Baumüller Kamenz GmbH declares, that the device is accordant to
the safety- and health requirements , which result from the guidelines and standards, which are listed in the
Declaration of Conformity.
C.4 Denition of the term Delaration by Manufaturer
A Manufacturer’s Declaration as defined in this manual is a declaration that the machine/safety equip-
ment brought into circulation conforms to all the relevant fundamental safety- and health requirements.and
Gesundheitsanforderungen entspricht. Baumüller Kamenz GmbH declares in this chapter with this Manu-
facturer’s Declaration, that the device is accordant with the relevant basic safety- and health requirements ,
which result from the directives and standards, which are listed in the Manufacturer’s Declaration.
162 Instrution Manual b maXX ® BM3400
from 206 Doument No.: 5.07013.03 Baumueller Kamenz GmbH

Baumuller b maXX BM3400 Series Specifications

General

Brand	Baumuller
Model	b maXX BM3400 Series
Category	Media Converter
Language	English