Mounting
Instruction handbook b maXX BM4400, BM4600, BM4700
Document No.: 5.12008.07
147
of 358
6
6.2.1 Drilling patterns
Use the drilling pattern to make the necessary drill holes/cutout sections.
How to determine the required space in the control cabinet, see ZDim
ensions– from
page 31.
Tolerance
specifications
Drill hole dimensioning ±0.2 mm
Dimensioning openings +1.0 mm
Relative tolerance of discretionary divisions ±0.1 mm
6.2.1.1 Drilling patterns BM441X
Figure 59: Drilling pattern BM441X
NOTE!
Consider the minimum clearances for cooling when making the drill holes.
All dimensions in millimeters [mm].
Further notes see ZDimensions– from page 31 and ZCooling– from page 61.
To Next Page
Loading...
