Technical Data
Instruction handbook b maXX BM4400, BM4600, BM4700
Document No.: 5.12008.07
55
of 358
3
3.3.4 Required environmental conditions
Transport temperature range - 25 °C to + 70 °C
Transport climatic category
EN 60721-3-2
2 K 3
Storage temperature range - 25 °C to + 55 °C
Storage climatic class
EN 60721-3-1
1 K 4
Operation environment industrial system
1)
Operation temperature range min. 5 °C to max. 55 °C
(rated temperature 40 °C)
Operation climatic class
EN 60721-3-3
3 K 3
Mounting height
2)
absolute altitude up to 2000 m
Humidity (operation)
EN 60721-3-3
relative humidity: 5 % to 85 % no condensation
and
absolute humidity: 1 g/m
3
to 25 g/m
3
Ionizing and non-ionizing radiation lower than measurable range
Vibration, shock and repetitive shock
EN 61800-5-1, section 5.2.6.4 Vibration test
max. 0.5 g during operation
Degree of pollution
EN 61800-5-1, table 6, Tab. 2
2
1)
For the operation in an environment of category C2 according to IEC 61800-3:2012, additional measures may be required.The manu-
facturer of the installation / user must provide the following evidence in this case:
The additional measures are effective. The specified
limit values of category C2, which are described in IEC 61800-3, are complied with.
2)
See correction factors at environmental conditions, which were changed ZMounting height– on page 56.
NOTICE!
Normally, non-conductive pollution occurs. Conductive pollution is unacceptable.
Conductive pollution can lead to the destruction of the device. The customer is re-
sponsible for destructions, which were caused by pollution due to conductive materi-
als or components.
To Next Page
Loading...
