Electrical data basic units
Instruction handbook b maXX BM4400, BM4600, BM4700
Document No.: 5.12008.07 Baumüller Nürnberg GmbH
84
of 358
3.4
3.4.2 Electrical data BM46XX acceleration units
Acceleration units are developed for a cycle with 1.25 s peak current at a total cycle of
5 s, see ZFigure 29– on page 59. The units are not developed for using at standstill or
output frequencies lower than 10 Hz with peak current. For this units the ZOutput fre-
quency dependent continuous current derating BM4XXX– on page 112 and the ZOutput
frequency dependent maximum current derating BM46XX– on page 113.
NOTE!
The acceleration units require a controller FW version 3.10 or higher!
To Next Page
Loading...
