Baumuller BM4400 - ES Controller

Design and Operation
Instruction handbook b maXX BM4400, BM4600, BM4700
Document No.: 5.12008.07
121
of 358
4
4.2.2 ES controller
The controller is ordered with the desired function/option modules. The modules cannot
be changed later.
Refer to ZType code– from page 126.
Following controller part types are available:
NOTE
EtherCAT option modules must not be plugged in slot J of a 3-rowed controller unit,
because the module can be damaged.
In case another BM4X-X-XXX plug-in module is plugged in an unsuitable slot, it will
not operate. We have made sure, that neither the module nor the device are dam-
aged.
narrow
In this type up to 5 additional
function/option modules can be
installed.
Controller interface RS232 or
Ethernet.
This controller unit is available
only in the 
BM441X-XXX-X1XXX.
wide
In this type up to 5 additional
function/option modules can be
installed.
Controller interface RS232 or
Ethernet.
This controller unit is available
for every BM4000.
This controller unit is available
for every BM4000 except for the 
BM441X-XXX-X0XXX and
BM441X-XXX-X1XXX.