31
of 358
Instruction handbook b maXX BM4400, BM4600, BM4700
Document No.: 5.12008.07
3TECHNICAL DATA
3.1 Dimensions
The following dimension drawings show the main dimensions of the devices. By means
of the dimension drawings the space requirements within the control cabinet are deter-
mined. The dimension drawings in ZDrilling patterns– from page 147 must be used in or-
der to do the required drilling / segments.
NOTE!
All dimensions in mm.
NOTE!
Only the basic controller has a design cover.
NOTE!
The following devices are shown with design cover. The ES controller is designed
without a design cover. The depth of the device was reduced by 66.5 mm due to this.
It must be considered that the connectors and cables require additional space.
To Next Page
Loading...
