Mounting
Instruction handbook b maXX BM4400, BM4600, BM4700
Document No.: 5.12008.07
155
of 358
6
6.3 Mounting instructions
There are different kinds of mounting.
Each mounting method is shown in a graphic (see ZFigure 69– on page 156 to ZFigure
72– on page 159)
The screws and washers required for mounting are listed beneath the respective graphic.
Carry out mounting as follows:
1 Provide suitable transport/lifting equipment as needed.
2 Keep suitable fastening components readily available.
3 For cold plate devices:
n check the surface quality of device’s rear panel/mounting plate, refer to ZRequire-
ments mounting plate for cold plate– on page 162
4 Mount the device.
5 Subsequently connect the water-cooling unit
To Next Page
Loading...
