Baumuller BM4400 - Mains Filter Selection

Mains filters
Instruction handbook b maXX BM4400, BM4600, BM4700
Document No.: 5.12008.07 Baumüller Nürnberg GmbH
298
of 358
11.3
11.3.5 Mains filter selection
TT/TN system
1)
Rated temperature = 50° C
NOTE!
The rated current of the filters that are used must be larger than or have same RMS-
value as the actual power suppl.y current (actual power supply current = RMS-value
of the power supply current during the entire cycle time of the drive). During short-
time operation (S3), the RMS-value is calculated as follows:
I
rms
1
T
---
i
2
0
T

dt=
I
rated AC
1)
Typ Part No.
7 A BFN-3-1 - 0007 - 001 314277
16 A BFN-3-1 - 0016 - 001 314278
30 A BFN-3-1 - 0030 - 001 314279
42 A BFN-3-1 - 0042 - 001 314280
56 A BFN-3-1 - 0056 - 001 314281
75 A BFN-3-1 - 0075 - 001 314282
100 A BFN-3-1 - 0100 - 001 314283
130 A BFN-3-1 - 0130 - 001 314284
150 A EPCOS B84143A0150R410 437618
180 A BFN-3-1 - 0180 - 001 314285
250 A BFN-3-1 - 0250 - 001 373891
320 A BFN-3-1 - 0320 - 001 439384
BFN-3-1 - 0320 - 101 373896
400 A BFN-3-1 - 0400 - 101 373900
600 A BFN-3-1 - 0600 - 001 373901
BFN-3-1 - 0600 - 101 419997
1000 A BFN-3-1 - 1000 - 101 423683