Baumuller BM4400 - Page 235

Troubleshooting and fault correction
Instruction handbook b maXX BM4400, BM4600, BM4700
Document No.: 5.12008.07
235
of 358
9
Operating 
software ProDrive
Furthermore the error message is shown in the operating software:
h Start the op
erating program ProDrive (from FW 3.07), if it isn’t running yet.
In case the software version of the controller and the ProDrive version is not compatible,
following message is displayed (also see online help ProDrive):
Figure 98: ProDrive version conflict
NOTE!
The controller software version and the operating software version must be compat-
ible to use ProDrive with all functions.
NOTE!
Please contact Baumüller Nürnberg GmbH or visit our website www.baumueller.de
for download the latest version of ProDrive, if the controller software version is not
available in your ProDrive version.