Troubleshooting and fault correction
Instruction handbook b maXX BM4400, BM4600, BM4700
Document No.: 5.12008.07
259
of 358
9
P0264 Global drive warnings
P0265 Warning Power supply monitor
Warning No. Meaning Troubleshooting
48 Drive not synchronous
49 to 51 reserved
52 Warning encoder 1 Exchange of the encoder recommended
53 Warning encoder 2 Exchange of the encoder recommended
54 to 63 not assigned = 0
Warning No. Meaning Troubleshooting
64 Power supply monitor has detected warning
power failure
Power supply monitor has detected warning power failure
65 Power supply monitor has detected warning
phase failure
Power supply monitor warning phase failure
66 Power supply monitor has detected a lower volt-
age than warning threshold undervoltage power
supply P2058
Power supply monitor has detected a lower voltage than warning
threshold undervoltage power supply P2058
67 Power supply monitor has detected a higher volt-
age than warning threshold overvoltage power
supply P2059
Power supply monitor has detected a higher voltage than warning
threshold overvoltage power supply P2059
68 Power supply monitor has detected power supply
frequency below/equal than warning lower fre-
quency limit P2060
Power supply monitor has detected power supply frequency
below/equal than warning lower frequency limit P2060
69 Power supply monitor has detected power supply
frequency higher than warning upper frequency
limit P2061
Power supply monitor has detected power supply frequency
higher than warning upper frequency limit P2061
To Next Page
Loading...
