baxter Auto Syringe AS50 User Manual

07-19-B3-430 Auto Syringe AS50 Infusion Pump Operator’s Manual Page 29
Detailed Instructions
3. Open the BARREL CLAMP (3) by moving either of the BARREL CLAMP RELEASE
LEVERS (4). Allow the barrel clamp to slide all the way open.
4. Place the syringe in the CRADLE (5). Be sure the syringe is centered in the V of the
cradle, and that the flange of the syringe fits into the FLANGE SLOT (6).
5. Push the BARREL CLAMP (3) in firmly so that it securely grips the syringe barrel. The
barrel clamp is shaped to fit the heel of the hand, making it easy to firmly clamp the
syringe.
6
5
3

baxter Auto Syringe AS50 Specifications

General

Brand	baxter
Model	Auto Syringe AS50
Category	Water Pump
Language	English