baxter Auto Syringe AS50 User Manual

Detailed Instructions
Page 32 Auto Syringe AS50 Infusion Pump Operator’s Manual 07-19-B3-430
Programming
The pump is ready for programming when the preliminary operations have been
completed. The initial programming prompt is determined as follows:
● If the Protocol Library feature is enabled, a protocol selection prompt is displayed.
Continue with the “Using Protocols” section below.
● If the Protocol Library feature is not enabled, a mode selection prompt is displayed.
Skip to the appropriate mode programming section below.
For additional information about programming the pump, see “General Programming
Information” on page 48.
Using Protocols
If the Protocol Library feature is enabled, the pump display alternates the prompts
▲▼
SELECT LIBRARY and ▲▼ SELECT PROTOCOL.
Selecting a Protocol Library
If ▲▼SELECT LIBRARY is displayed, use the ▲ and ▼ keys as necessary to display the
name of the desired protocol library and press
CONFIRM to complete the selection.
Note: If the
NONE selection is available, the Protocol Library feature may be bypassed
by selecting
NONE. Continue with the appropriate mode programming section
below.
Selecting a Protocol
If ▼▲ SELECT PROTOCOL is displayed, use the ▲ and ▼ keys as necessary to display
the name of the desired protocol, and press
CONFIRM to complete the selection.
Note: The protocol name is continuously displayed in the text field except when a mes-
sage or prompt must be displayed.
If the
NONE selection is available, the Protocol Library feature may be bypassed
by selecting
NONE. Continue with the appropriate mode programming section
below.

baxter Auto Syringe AS50 Specifications

General

Brand	baxter
Model	Auto Syringe AS50
Category	Water Pump
Language	English