07-19-B3-430 Auto Syringe AS50 Infusion Pump Operator’s Manual Page 85
Warranty and Service
InformationChap ter 3
Warranty
Baxter Healthcare Corporation (“Baxter”) warrants that the equipment shall be free from
defects in material and workmanship when delivered to the original purchaser. Baxter's
sole obligation shall be limited to repair or replacement at Baxter’s option and expense, of
the defective part or unit for a period of one year following the date of initial delivery. The
applicable period for batteries is limited to a period of 12 months following the date of
initial delivery.
The warranty extends only to the original purchaser and is not assignable or transferable,
and shall not apply to auxiliary equipment or disposable accessories. Baxter’s
commitment to repair or replace the product will be null and void if this product is used
contrary to the directions for use contained in the labeling. Baxter will assume no
responsibility for incidents which may occur if the product is not used in accordance with
product labeling.
THERE ARE NO OTHER WARRANTIES INCLUDING ANY IMPLIED WARRANTY AND
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE WHICH EXTEND BEYOND THE DESCRIPTION OF THE PRODUCT AND
THOSE EXPRESSLY SET FORTH IN ITS LABELING. In no event shall Baxter be
responsible for incidental, consequential, or exemplary damages. Modification, alteration,
recalibration or abuse, and service by other than a Baxter authorized representative may
void the warranty.
Service Information
While under Baxter Warranty, Service Agreement (optional), or lease agreement, the
instrument must not be opened by unauthorized personnel.
For service and repair information for this product, call the Baxter Healthcare Corporation
Andover Service Center at 1-800-343-0366 (Customer Service) or 1-800-634-4602
(Technical Service).
Shipping costs for all units returned to Baxter shall be paid for by the customer. The unit
must be packed in its original container or in a container that will provide adequate
protection during shipment. To ensure prompt return, the Baxter Healthcare Corporation
Andover Service Center must be notified before shipping any unit for repair. When calling,
please be prepared to provide the product code number and serial number of the unit. A
service authorization number will be issued and should accompany all communications. A
brief written description of the problem should be attached to the instrument when it is
returned for service.
Baxter will not be responsible for unauthorized returns or for units damaged in shipment
due to improper packing.
To Next Page
Loading...
Need help?
General
