BD LSR II - Page 60

60 BD LSR II User’s Guide
6 Adjust the P1 gate on the Unstained Control worksheet, as needed, to
encompass only the singlet population (Figure 3-6).
; Tip To quickly adjust the gate, right-click the gate boundary, and choose
Recalculate.
Figure 3-6 P1 gate adjusted to singlet population
7 Right-click the gate and choose Apply to All Compensation Controls.
The P1 gate on each Stained Control worksheet is updated with your
changes.
LSR2.book Page 60 Tuesday, April 25, 2006 3:34 PM