Product Description QTERM-G72 Terminal
86
Qlarity-Based Terminal Hardware
CHEMICAL RESISTANCE
Plastic Enclosure
Chemical Class Effects
Acids
No significant effect under most typical conditions of con-
centration and temperature.
Alcohols
Generally compatible at low concentration and room temper-
ature. Higher concentrations and elevated temperatures can
result in etching and attack evidenced by decomposition.
Alkalis
Generally compatible at low concentration and room temper-
ature. Higher concentrations and elevated temperatures can
result in etching and attack evidenced by decomposition.
Aliphatic Hydrocarbons Generally compatible.
Amines Surface crystallization and chemical attack. Avoid.
Aromatic Hydrocarbons
Partial solvents and severe stress cracking agents (i.e.,
xylene, toluene). Avoid.
Detergents and Cleaners
Mild soap solutions are generally compatible. Strong alkaline
materials should be avoided.
Esters Cause severe crystallization. Partial solvents. Avoid
Greases and Oils
Pure petroleum types generally compatible. Many additives
used with them are not.
Halogenerated Hydrocarbons Solvents. Avoid.
Ketones
Cause severe crystallization and stress cracking. Partial sol-
vents. Avoid.
Silicone Oil and Greases
Generally compatible up to 185
°F. Some contain aromatic
hydrocarbons which should be avoided.
Touchscreen
Industrial chemicals: acetone, methylene chloride, methyl ethyl ketone, isopropyl alcohol,
hexane, turpentine, mineral spirits, unleaded gasoline, diesel fuel, motor oil, transmission
fluid, antifreeze. Food service chemicals: vinegar, coffee, tea, grease, cooking oil, salt, plus
most commercial cleaners including ammonia-based glass cleaner, and laundry detergent.
To Next Page
Loading...
Need help?
General
