What to do if BenQ T3300 Medical Equipment can't read/write data from microSD card?
If your BenQ Medical Equipment can’t read/write data from the microSD card, remove any connected USB storage devices from the system. If that doesn’t work, insert the microSD card into a computer for inspection. If it still fails, try inserting another microSD card into the system for inspection.
How to fix Bluetooth connection on BenQ Medical Equipment?
If Bluetooth connection fails on your BenQ Medical Equipment, turn off the Bluetooth function, then turn it back on. If the problem persists, the Bluetooth module may not be functioning, so connect another Bluetooth device to the system for inspection.
What to do if BenQ Medical Equipment can't read/write data from USB?
If your BenQ Medical Equipment can’t read or write data from the USB storage device, make sure that only one USB storage device is connected to the system and that the USB storage device you wish to read/write data from is connected to the system through the USB 3.0 port. If the issue continues, insert the USB storage device into a computer for inspection. Also test with another USB storage device to check the USB ports.
Why is the wireless connection failing on BenQ T3300 Medical Equipment?
If the wireless connection on your BenQ Medical Equipment fails, first check the power of the wireless device and restart it. Then connect another wireless product to this device for inspection. Also, open the Quick Setup menu and check if the wireless network function is enabled. If problems persist, the wireless network settings may not be correct, and you should contact your network administrator.
How to fix no audio on BenQ T3300?
If there's no audio coming from your BenQ Medical Equipment speakers, the system might be muted. Open the Quick Setup menu and adjust the volume. If that doesn't work, the speakers might be damaged, and you should contact technical support.
What to do if BenQ T3300 can't charge or has short runtime?
If your BenQ Medical Equipment isn’t charging or has a short runtime, the power supply might be damaged, or the battery may be at the end of its life. Allow the battery to charge overnight and check the battery status again. If the issue persists, contact technical support.
Why is my BenQ Medical Equipment overheating?
If your BenQ Medical Equipment is overheating, it could be due to a couple of reasons. The ventilation slots might be blocked, so place the system in a well-ventilated area and remove any dust or stains from the ventilation slots. If that doesn't help, the system’s fans may not be working, and you should contact technical support.
General| Brand | BenQ |
|---|---|
| Model | T3300 |
| Category | Medical Equipment |
| Language | English |
To Next Page