Bernina 735 - Buttonhole Finishing and Eyelets

Buttonholes
109
9.11 Programming the Heirloom buttonhole
Prerequisite:
• The Buttonhole foot with slide#3A is fitted.
> Tap «Buttonholes».
> Select Heirloom buttonholeNo.63.
> Sew the required length of the buttonhole.
> To program the length, push the button «Quick Reverse».
– The machine finishes the buttonhole automatically. All subsequent buttonholes are sewn at the same
length.
9.12 Sewing the manual 7-step buttonhole
The length of the buttonhole is determined manually when sewing. The bartack, eye and securing stitches
are preprogrammed. The individual steps can also be selected by scrolling using the arrow icons or by
pressing the button «Quick Reverse».
Prerequisite:
• The Buttonhole Foot#3 is fitted.
> Tap «Buttonholes».
> Select Standard buttonholeNo.51.
> Tap «i-Dialog».
man
> Tap «Manual Length Adjustment».
– Step 1 is activated in the display for the start of the buttonhole.
> Sew the required length of the buttonhole.
– Step 2 becomes active when sewing starts.
> Stop when the required length of the buttonhole or length marking is reached.
> Step3 appears by tapping «Scroll down».
– The machine sews straight stitches in reverse.
> Stop the machine at the level of the first stitch at the start of the buttonhole.
> Step 4 appears by tapping «Scroll down».
– The machine sews the upper bartack and stops automatically.
> Step5 appears by tapping «Scroll down».
– The machine sews the second bead.
> Stop the machine at the level of the last stitch of the first bead.