Creative embroidering
156
> Tap «Multi-colored Embroidery Motif On/Off».
– The embroidery motif is embroidered in one color.
Color indication
Every color of the embroidery motif can be selected individually. The hoop moves to the first stitch of the
current color. The currently active color can be embroidered individually or in another sequence.
> Select an embroidery motif.
> Tap «Embroidery».
> Touch the icon Scroll up to select the previous color of the embroidery motif.
15.11 Freearm Embroidery
Freearm embroidering is defined as embroidering tubular fabrics or garments which are positioned around
the freearm of the embroidery machine while being embroidered. Often used for sleeves, trouser legs or
other narrow-tailored garments.
The mobility of the embroidery arm can be restricted or impeded with very narrow fabric tubes. Therefore
make sure that the embroidery hoop can move forwards and backwards sufficiently. An impediment of the
embroidery arm caused by a fabric tube which is too tight can result in embroidery motif offset or damage to
the fabric.
Check the movability of the freearm
Note: If the fabric tube is narrow, deactivate the Thread Away Mode in the Setup Program.
> Open the embroidery motif on the machine and edit as desired.
> Mark the embroidery motif position and the size on the fabric in a suitable way.
> Select the embroidery hoop as small as possible.
> Hoop or stick the fabric along with the appropriate stabilizer in the embroidery hoop, depending on the
stabilizer.
> Pull the fabric tube carefully over the freearm of the machine and attach the embroidery hoop at the
clutch of the embroidery module.
> If necessary, reposition the embroidery motif.
> Tap «Check Embroidery Motif Size».
> After the successful check of the embroidery motif size, start the embroidery process.
To Next Page
Loading...
