Bernina 735 - Quilting; Quilting Programs and Techniques

Buttonholes
111
9.14 Cutting the buttonhole open with the seam ripper
> Place a pin in each end of the buttonhole to avoid accidental cutting into ends of buttonhole.
> Cut the buttonhole from both ends to the middle.
9.15 Cutting open buttonholes with the buttonhole cutter (optional
accessory)
> Place the fabric on an appropriate piece of wood.
> Position the cutter in the center of the buttonhole.
> Press down on the cutter with your hand.
9.16 Sewing on buttons
The Button Sew-on Program can be used to sew on buttons with two or four holes, press studs or snap
fasteners.
Recommended Sewing
Program:
Button sew-on programNo.60
Recommended Presser Foot: Button Sew-On Foot#18
Alternative Presser Feet: • Reverse Pattern Foot#1
• Darning Foot#9
• Reverse Pattern Foot with Clear Sole#34