System settings
63
4 System settings
4.1 Calling up the Tutorial
The Tutorial gives information and explanations, covering various aspects of sewing, embroidering and the
different stitches.
> Tap «Tutorial».
> Select the desired topic in order to view information.
4.2 Calling up the Creative Consultant
The Creative Consultant provides information about decision support concerning sewing projects. After
entering the fabric and the desired sewing project, suggestions for suitable needles, presser feet etc. are
displayed.
> Tap «Creative Consultant».
> Select the fabric on which you want to sew.
> Select the sewing project.
4.3 Calling up the Embroidery Consultant
The Embroidery Consultant informs you about decision support for embroidery projects. After entering the
desired embroidery project and the fabric, suggestions for the suitable needle and the suitable embroidery
foot are displayed.
> Tap «Embroidery Consultant».
> Select the embroidering project.
> Select the fabric on which you want to embroider.
> Tap «Confirm».
– If an embroidery motif has already been selected, a warning appears stating that this will be
overwritten.
4.4 Calling up the Help
> Touch the window in the display where help is needed.
> To start the Help Mode, tap «Help» twice.
> Tap the icon in the display where help is needed.
4.5 Using eco mode
During a longer interruption of work the machine can be set into a power save mode. The power save mode
also serves as a child safety feature. Nothing can be selected in the display and the machine cannot be
started.
> To activate the power save mode, tap «eco Mode».
– The display goes to sleep. The power consumption is reduced and the sewing light is off.
> To deactivate the power save mode, tap «eco Mode» again.
4.6 Cancelling any alterations with «clr»
Any alterations to motifs can be reset to basic setting. Exceptions are saved motifs which have been filed in
the personal memory and monitoring functions.
> Tap «Clear Settings».
To Next Page
Loading...
