Bernina 735 - Mirroring a Stitch Pattern Combination; Stitch Pattern Combination Subdivider 1

Creative sewing
72
> Tap «Stitch Width»(3).
3
4
> Tap «Adjust Width within Combination»(4).
– The widths of all of the stitch patterns are adapted to the width of the widest stitch pattern in the
combination
Furthermore, the length and width of the stitch pattern combination are increased or decreased
proportionally.
> To decrease the width of the stitch pattern combination proportionally, turn the «Upper Multi-function
knob»
anti-clockwise.
> To increase the width of the stitch pattern combination proportionally, turn the «Upper Multi-function
knob»
clockwise.
> To decrease the length of the stitch pattern combination proportionally, turn the «Lower Multi-function
knob»
anti-clockwise.
> To increase the length of the stitch pattern combination proportionally, turn the «Lower Multi-function
knob»
clockwise.
Mirroring a stitch pattern combination
> Create a stitch pattern combination.
> Tap «i-Dialog».
> Tap «Edit Entire Combination».
> To mirror the whole stitch pattern combination from left to right, tap, «Mirror Image Left/Right».
> To reset the changes and revert to the default settings, tap «Mirror Image Left/Right».
Stitch pattern combination Subdivider 1
A stitch pattern combination can be subdivided into several sections. The subdivision is placed beneath the
cursor. Only this section is sewn where the cursor is placed. To sew the next section, the cursor must be
placed in the next section.
> Create a stitch pattern combination.
> Select the desired position within the stitch pattern combination where the stitch pattern combination is
to be subdivided.
> Tap «i-Dialog».