Bernina 735 - Embroidery Settings; Adjusting the Upper Thread Tension; Adjusting the Maximum Embroidering Speed; Centering or Opening Embroidery Motifs in the Original Position

Setup Program
52
3.2 Embroidery settings
Adjusting the upper thread tension
Changes to the upper thread tension in the Setup Program affect all of the embroidery motifs.
> Tap «Setup Program».
> Tap «Embroidery settings».
> Tap «Adjusting the upper thread tension».
> Adjust the upper thread tension.
Adjusting the maximum embroidering speed
You can use this function to reduce the maximum speed.
> Tap «Setup Program».
> Tap «Embroidery settings».
RPM
> Tap «Maximum Embroidery Speed».
> Set the maximum sewing speed.
Centering or opening embroidery motifs in the original position
When the embroidery motif is opened on the machine, it is always centered to the embroidery hoop. If you
want the embroidery motif to be opened in its original position (defined by the BERNINA embroidery
software), the function «Centering the embroidery motif»must be activated.
> Tap «Setup Program».
> Tap «Embroidery settings».
> Tap «Centering the embroidery motif».
> Tap the switch in the right section.
– A previously moved embroidery motif which has been saved in the new position is opened in the
saved position after selecting.
> Tap the switch in the right section again.
– The embroidery motif is centered to the embroidery hoop.