Bernina 735 - Rotating Motif; Altering the Embroidery Motif Size Proportionally

Creative embroidering
142
Rotating motif
> Select an embroidery motif.
> Tap «i-Dialog».
> Tap «Rotate Embroidery Motif».
> Turn the «Upper Multi-function knob» or the «Lower Multi-function knob» to the right to rotate the
embroidery motif clockwise.
> Turn the «Upper Multi-function knob» or the «Lower Multi-function knob» to the left to rotate the
embroidery motif counter-clockwise.
> To rotate the embroidery motif in 90°-steps, tap «Rotate the embroidery motif +90°».
Altering the embroidery motif size proportionally
Enlargements or reductions of the motif size up to maximum 20% achieve the best results.
If the motif size is to be altered by more than 20%, the motif should be adapted in a separate
embroidery software and then reloaded onto the machine.
> Select an embroidery motif.
> Tap «i-Dialog».
> Tap «Change Motif Size».
> If «Retain proportions» is not outlined in white, tap «Retain proportions».
– «Retain proportions» is outlined in white.
> Turn the «Upper/Lower Multi-function knob» to the right to scale up the embroidery motif
proportionally.
> Turn the «Upper/Lower Multi-function knob» to the left to downsize the embroidery motif
proportionally.