Bernina 735 - Changing the Stitch Type; Altering the Stitch Density; Checking the Size and the Position of the Embroidery Motif

Creative embroidering
144
Changing the stitch type
If the satin stitches are too long, they can be changed to step stitches.
> Select an embroidery motif.
> Tap «i-Dialog».
> Tap «Alter Stitch Type/Stitch Density».
1
2
> Touch the switch in the upper section of the display (1) to change the satin stitch to the step stitch.
> Set the stitch length to 2.
Altering the stitch density
If the satin stitches are embroidered too densely, the stitch density can be adjusted.
> Select an embroidery motif.
> Tap «i-Dialog».
> Tap «Alter Stitch Type/Stitch Density».
1
> Adjust the stitch density(1).
Checking the size and the position of the embroidery motif
It can be checked whether or not the embroidery motif matches the designated position/location on the
fabric. Points which are beyond the embroidery hoop are not traveled to.
> Select an embroidery motif.
> Tap «i-Dialog».