Bernina 735 - Motif Combination and Grouping

Creative embroidering
143
Altering the embroidery motif size disproportionally
Enlargements or reductions of the motif size up to maximum 20% achieve the best results.
If the motif size is to be altered by more than 20%, the motif should be adapted in a separate
embroidery software and then reloaded onto the machine.
> Select an embroidery motif.
> Tap «i-Dialog».
> Tap «Change Motif Size».
> If «Retain proportions» is outlined in white, tap «Retain proportions».
– «Retain proportions» is not outlined in white.
> To make the embroidery motif wider, turn the «Upper Multi-function knob» clockwise.
> To make the embroidery motif narrower, turn the «Upper Multi-function knob» anti-clockwise.
> To make the embroidery motif longer, turn the «Lower Multi-function knob» clockwise.
> To make the embroidery motif shorter, turn the «Lower Multi-function knob» anti-clockwise.
Mirroring embroidery motifs
Embroidery motifs can be mirror-imaged both vertically and horizontally.
> Select an embroidery motif.
> Tap «i-Dialog».
> To mirror the embroidery motif horizontally, tap «Mirror Image Left/Right».
> To mirror the embroidery motif vertically, tap «Mirror Image Up/Down».