BERNINA Stitch Regulator (BSR)
119
Securing in BSR2 Mode
Prerequisite:
• The BSR Presser Foot is fitted and connected to the machine.
• The BSR display opens and a BSR2 Mode is active.
> Lower the presser foot.
> Tap «i-Dialog».
> Tap «Securing Stitches».
> Press the foot control or push the button «Start/Stop».
By moving the fabric some short securing stitches are sewn, then the programmed stitch length is activated
and the securing function is deactivated automatically.
To Next Page
Loading...
