Bernina 735 - BERNINA Stitch Regulator (BSR); BSR Modes and Functions; BSR Setup and Operation

Quilting
114
> Press the foot control.
– The machine sews 6 stitches forward automatically when sewing is started.
> Sew the seam in the desired length.
> Push the button «Quick Reverse».
– The machine sews 6 stitches forward automatically and stops automatically at the end of the Securing
Program.
10.3 Sewing handlook quilt stitches
Handlook quilt stitches are suitable for all fabrics and sewing projects that should look like hand-sewn. It is
recommended to use a monofilament thread as upper thread and an embroidery thread as bobbin thread.
The sewing speed should be moderate to prevent the monofilament from breaking. If required, the upper
thread tension and the balance can be adjusted to the sewing project and the desired quilt stitch.
Prerequisite:
• The Reverse Pattern Foot#1 is fitted.
> Tap «Quilt Stitches».
> Select Hand-look quilt stitchNo.1304No.1308.
> If necessary, adjust the upper thread tension and the balance to suit the sewing project and the desired
quilt stitch.
> To start the machine, press the foot control or push the button «Start/Stop».
10.4 Guiding the quilt work freely