S12 Vet Monitor User’s Manual
9-2
CAUTION:
Only use parts and accessories specified in this manual, and obey all warnings
and cautions.
Respiration monitoring is not for use on the patients who are very active, as
this will cause false alarms.
9.3. RESP Display
(1) Parameter label (2) RESP waveform gain
(3) RESP lead (4) Resp waveform
(5) RR
unit
(6) RR Alarm limits: If the respiration rate is turned off, the alarm off icon will be
displayed here.
(7) RR
value (8) RR source
9.4. Placing RESP Electrodes
As the Respiration measurement adopts the standard ECG electrode placement, you
can use different ECG cables. Since the respiration signal is measured between two ECG
electrodes, if a standard ECG electrode placement is applied, the two electrodes should be
RA and LA, or RA and LL.
For more information, see 8.4.2 Applying Electrodes.
21 3
4
5
6
7
8
To Next Page
Loading...