Biolight Meditech S12 Vet - 6.4. Other Bed Observation

S12 Vet Monitor User’s Manual
6-4

2. Select【Review】.
6.4. Other Bed Observation
You can check the alarm status and real-time physiological data of patients on other
remote monitors in the LAN on the monitor. A remote monitor (such as a bedside monitor)
is also called other bed monitor. You can monitor the alarms of up to 16 other beds at the
same time, and you can also view the waveform of 1 other bed from the current monitor.
You can monitor the alarm of other bed through the alarm monitoring area of【Other
Bed View】 interface.
CAUTION：
 Can view the monitor through the remote monitor. You can check the alarm
and waveform of this monitor from 5 remote monitors at the same time.
6.4.1. Other Bed Screen
Through the 【Other Bed View】screen, you can check the real-time parameters and
waveforms of a remote monitor and monitor the alarm of other monitors.
6.4.1.1. Entering Other Bed Screen
Entering other bed screen by any of the following methods:
 Select【Remote View】quick key.
 Select【Screen Setup】quick key→Select【Screen Select】submenu→Select
【Other Bed View】.
6.4.1.2. Other Bed Interface
Below is other bed observation interface: