S12 Vet Monitor User’s Manual
8-2
Interference from a non-grounded instrument near the patient and
electrosurgery interference can cause problems with the waveform.
8.3. ECG Display
The following figures show the ECG waveform and parameter areas. Your display
may be configured to look slightly different.
Waveform Display
(1). ECG lead label
(2). ECG waveform gain
(3). ECG filter mode
(4). ECG waveform
speed
(5). Paced status: If【Paced】is set to 【Yes】, is displayed; If【Paced】is set
to【No】,
is displayed.
(6). Notch frequency
(7). Alarm message:
Display only the highest level of alarm information.
(8). Pace pulse mark:If 【Paced】 is set to 【Yes】,the pace pulse markers are
shown on each ECG waveform when the patient has a paced signal.
7
8
1 3
4
5
6
2